Chapter 488: 488
If audio player doesn't work, press Stop then Play button again
Wizard tower, astrology.
Alan's figure stands in front of the central crystal suspended in the center. Next to him are Bess, Selena and Helen.
"See clearly?"
A complex floating city structure is suspended in the air. This is the planning drawing of the floating city at the present stage: "I need you to command those dwarf demons and alien workers to build according to the above requirements."
"Can you do it?"
The three nodded and said, "no problem."
Alan smiled and said, "well, go and prepare!"
The three people who finished the task leaned slightly and left, and then thousands of aliens and dwarf demons in the wizard tower began to get busy.
Atlantis, downtown.
A group of dwarf demons drew lines on the ground, and then the aliens began to dig along the lines. According to Allen's drawings, a large number of gullies need to be excavated in the central urban area of Atlantis.
Some of these gullies are for laying energy pipelines, and some are for building structures.
Obsidian pieces are taken out from the warehouse, and then placed in the designated position according to the specified requirements. Although aliens have wisdom, they can't understand too complex problems.
Allen's maids are responsible for this work. They command dwarf demons and the opposite sex to work. A large number of magic metals are also transported from the storage room to strengthen the floating city after smelting.
Alan sat on the sofa thinking. He was going to open another sub mine. The development of SART island was not high. Except for the largest SART Island, there were few people on other islands. Some remote islands were inhabited by savages or pirates.
These islands are rich in minerals. He chose two islands rich in minerals. Allen built a magic barrier to cover the two islands, and then built a simple stronghold here.
Put those non mutated gold eater cubs in. The element concentration here is far lower than the wizard tower, which can ensure that these gold eaters will not change.
Allen is not only preparing to build the steel magic statue production line, but also trying to connect the wizard tower with the floating city.
The central urban area of Atlantis has been separated from the peripheral urban area. As long as various energy pipelines are laid and the floating city is connected, you can try to take off.
This is the main building of the floating city. After the main building is completed, the mystery lock and artificial magic net will be built step by step.
The construction cycle of a floating city is likely to last for decades or even hundreds of years. Allen is going to inform the Fifth Ring tower to send people to help.
Such a big city, if you only rely on Allen, you will be tired to death. Not to mention anything else, just the overall blessing hardening of the floating city is enough for you to be busy.
Hardening is not a very difficult spell. An official wizard can learn it with a little effort. In addition to hardening, various runes need to be engraved on the floating city to ensure that the floating city can adapt quickly under any conditions.
There is no magic lock in the wizard tower now. Allen has a set of magic locks left by ancient wizards in his hand. During this period, he has been studied very thoroughly. The magic locks obtained from the ruins are defensive, and the floating city as a war fortress needs strategic weapon deterrence.
Therefore, the mystery locks of floating city are basically legendary constructs integrating attack and defense.
"There are many things to do recently!"
Alan rubbed his temples and suddenly felt a little busy.
In addition to the transformation of the floating city, it is also necessary to complete the establishment of the steel magic image production line as soon as possible. Only by continuously manufacturing steel magic images can we launch a counterattack against the abyss and drive the abyss demons back to their hometown.
Compared with the stone magic image production line, the steel magic image production line is much more complex, but the steel magic image production line no longer needs carving technology, but is replaced by casting technology.
The steel magic image needs to add a large furnace to melt various metals in a specific proportion, and the molten metal liquid will be poured into a specific mold.
There are several ways to produce iron and steel magic image parts. The simplest and most common is the casting method. However, this method needs to make molds every time, and the parts after casting also need to go through a large number of later processes. The casting method is suitable for manufacturing complex parts.
In addition to the pouring method, there are plastic forming processes, such as forging, which shape the metal by hammering and extrusion under the conditions of cold processing or high-temperature operation. It is one of the simplest and oldest metal modeling processes, and it is also a very popular way in the world, such as blacksmith.
Although this method is common and simple, unexpected results will appear in the hands of some masters. Similarly, this method is the method with the most artifacts.
Binding: the high-temperature metal billet passes through several continuous cylindrical rollers, which tie the metal into the mold to obtain the preset shape. Compared with forging, rolling is obviously much more advanced, and mass industrial production starts from here. Including rear extrusion, stamping, etc.
Extrusion: a low-cost process for continuous processing, solid or hollow metal molding with the same cross-section shape, which can be used for high-temperature operation and cold processing.
Impact extrusion: a process used to process small to medium-sized parts without taper requirements. The production is fast, the parts with various wall thicknesses can be processed, and the processing cost is low.
In addition to these, Allen got a lot of more advanced technology from the iron warrior world, powder metallurgy.
Powder metallurgy: a process that can process ferrous and nonferrous metal components. It includes two basic processes: mixing alloy powder and pressing the mixture into the mold. Metal particles are formed by high temperature heating and sintering. This process does not need machining, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold.
Powder metallurgy also has a larger name 3D printer.
The 3D printer can make almost all metal parts. Allen is going to make a 3D printing device, specializing in the complex equipment in the steel magic image.
"Hot rays can be used to melt metal powder and add frozen rays for cooling."
"We also need a computer with strong enough computing power. This is a little troublesome, but we can use taling instead. This time, we got a legendary soul spar from the world of Diablo, which can be used as raw material."
"Well, we also need to add anti gravity control device. In other words, this 3D printing device is really complex." looking at the information obtained from the iron blood warrior, Allen chose to use various spells instead.
After all, if you copy the original, there will be a lot of materials that can't be processed. After all, some magic materials look unscientific. A 3D printer made of magic technology, hey hey! It's magical to think about it.
Please report us if you find any errors so we can fix it asap!
Wizard tower, astrology.
Alan's figure stands in front of the central crystal suspended in the center. Next to him are Bess, Selena and Helen.
"See clearly?"
A complex floating city structure is suspended in the air. This is the planning drawing of the floating city at the present stage: "I need you to command those dwarf demons and alien workers to build according to the above requirements."
"Can you do it?"
The three nodded and said, "no problem."
Alan smiled and said, "well, go and prepare!"
The three people who finished the task leaned slightly and left, and then thousands of aliens and dwarf demons in the wizard tower began to get busy.
Atlantis, downtown.
A group of dwarf demons drew lines on the ground, and then the aliens began to dig along the lines. According to Allen's drawings, a large number of gullies need to be excavated in the central urban area of Atlantis.
Some of these gullies are for laying energy pipelines, and some are for building structures.
Obsidian pieces are taken out from the warehouse, and then placed in the designated position according to the specified requirements. Although aliens have wisdom, they can't understand too complex problems.
Allen's maids are responsible for this work. They command dwarf demons and the opposite sex to work. A large number of magic metals are also transported from the storage room to strengthen the floating city after smelting.
Alan sat on the sofa thinking. He was going to open another sub mine. The development of SART island was not high. Except for the largest SART Island, there were few people on other islands. Some remote islands were inhabited by savages or pirates.
These islands are rich in minerals. He chose two islands rich in minerals. Allen built a magic barrier to cover the two islands, and then built a simple stronghold here.
Put those non mutated gold eater cubs in. The element concentration here is far lower than the wizard tower, which can ensure that these gold eaters will not change.
Allen is not only preparing to build the steel magic statue production line, but also trying to connect the wizard tower with the floating city.
The central urban area of Atlantis has been separated from the peripheral urban area. As long as various energy pipelines are laid and the floating city is connected, you can try to take off.
This is the main building of the floating city. After the main building is completed, the mystery lock and artificial magic net will be built step by step.
The construction cycle of a floating city is likely to last for decades or even hundreds of years. Allen is going to inform the Fifth Ring tower to send people to help.
Such a big city, if you only rely on Allen, you will be tired to death. Not to mention anything else, just the overall blessing hardening of the floating city is enough for you to be busy.
Hardening is not a very difficult spell. An official wizard can learn it with a little effort. In addition to hardening, various runes need to be engraved on the floating city to ensure that the floating city can adapt quickly under any conditions.
There is no magic lock in the wizard tower now. Allen has a set of magic locks left by ancient wizards in his hand. During this period, he has been studied very thoroughly. The magic locks obtained from the ruins are defensive, and the floating city as a war fortress needs strategic weapon deterrence.
Therefore, the mystery locks of floating city are basically legendary constructs integrating attack and defense.
"There are many things to do recently!"
Alan rubbed his temples and suddenly felt a little busy.
In addition to the transformation of the floating city, it is also necessary to complete the establishment of the steel magic image production line as soon as possible. Only by continuously manufacturing steel magic images can we launch a counterattack against the abyss and drive the abyss demons back to their hometown.
Compared with the stone magic image production line, the steel magic image production line is much more complex, but the steel magic image production line no longer needs carving technology, but is replaced by casting technology.
The steel magic image needs to add a large furnace to melt various metals in a specific proportion, and the molten metal liquid will be poured into a specific mold.
There are several ways to produce iron and steel magic image parts. The simplest and most common is the casting method. However, this method needs to make molds every time, and the parts after casting also need to go through a large number of later processes. The casting method is suitable for manufacturing complex parts.
In addition to the pouring method, there are plastic forming processes, such as forging, which shape the metal by hammering and extrusion under the conditions of cold processing or high-temperature operation. It is one of the simplest and oldest metal modeling processes, and it is also a very popular way in the world, such as blacksmith.
Although this method is common and simple, unexpected results will appear in the hands of some masters. Similarly, this method is the method with the most artifacts.
Binding: the high-temperature metal billet passes through several continuous cylindrical rollers, which tie the metal into the mold to obtain the preset shape. Compared with forging, rolling is obviously much more advanced, and mass industrial production starts from here. Including rear extrusion, stamping, etc.
Extrusion: a low-cost process for continuous processing, solid or hollow metal molding with the same cross-section shape, which can be used for high-temperature operation and cold processing.
Impact extrusion: a process used to process small to medium-sized parts without taper requirements. The production is fast, the parts with various wall thicknesses can be processed, and the processing cost is low.
In addition to these, Allen got a lot of more advanced technology from the iron warrior world, powder metallurgy.
Powder metallurgy: a process that can process ferrous and nonferrous metal components. It includes two basic processes: mixing alloy powder and pressing the mixture into the mold. Metal particles are formed by high temperature heating and sintering. This process does not need machining, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold.
Powder metallurgy also has a larger name 3D printer.
The 3D printer can make almost all metal parts. Allen is going to make a 3D printing device, specializing in the complex equipment in the steel magic image.
"Hot rays can be used to melt metal powder and add frozen rays for cooling."
"We also need a computer with strong enough computing power. This is a little troublesome, but we can use taling instead. This time, we got a legendary soul spar from the world of Diablo, which can be used as raw material."
"Well, we also need to add anti gravity control device. In other words, this 3D printing device is really complex." looking at the information obtained from the iron blood warrior, Allen chose to use various spells instead.
After all, if you copy the original, there will be a lot of materials that can't be processed. After all, some magic materials look unscientific. A 3D printer made of magic technology, hey hey! It's magical to think about it.
Wizard tower, astrology.Alan's figure stands in front of the central crystal suspended in the center. Next to him are Bess, Selena and Helen."See clearly?"A complex floating city structure is suspended in the air. This is the planning drawing of the floating city at the present stage: "I need you to command those dwarf demons and alien workers to build according to the above requirements.""Can you do it?"The three nodded and said, "no problem."Alan smiled and said, "well, go and prepare!"The three people who finished the task leaned slightly and left, and then thousands of aliens and dwarf demons in the wizard tower began to get busy.Atlantis, downtown.A group of dwarf demons drew lines on the ground, and then the aliens began to dig along the lines. According to Allen's drawings, a large number of gullies need to be excavated in the central urban area of Atlantis.Some of these gullies are for laying energy pipelines, and some are for building structures.Obsidian pieces are taken out from the warehouse, and then placed in the designated position according to the specified requirements. Although aliens have wisdom, they can't understand too complex problems.Allen's maids are responsible for this work. They command dwarf demons and the opposite sex to work. A large number of magic metals are also transported from the storage room to strengthen the floating city after smelting.Alan sat on the sofa thinking. He was going to open another sub mine. The development of SART island was not high. Except for the largest SART Island, there were few people on other islands. Some remote islands were inhabited by savages or pirates.These islands are rich in minerals. He chose two islands rich in minerals. Allen built a magic barrier to cover the two islands, and then built a simple stronghold here.Put those non mutated gold eater cubs in. The element concentration here is far lower than the wizard tower, which can ensure that these gold eaters will not change.Allen is not only preparing to build the steel magic statue production line, but also trying to connect the wizard tower with the floating city.The central urban area of Atlantis has been separated from the peripheral urban area. As long as various energy pipelines are laid and the floating city is connected, you can try to take off.This is the main building of the floating city. After the main building is completed, the mystery lock and artificial magic net will be built step by step.The construction cycle of a floating city is likely to last for decades or even hundreds of years. Allen is going to inform the Fifth Ring tower to send people to help.Such a big city, if you only rely on Allen, you will be tired to death. Not to mention anything else, just the overall blessing hardening of the floating city is enough for you to be busy.Hardening is not a very difficult spell. An official wizard can learn it with a little effort. In addition to hardening, various runes need to be engraved on the floating city to ensure that the floating city can adapt quickly under any conditions.There is no magic lock in the wizard tower now. Allen has a set of magic locks left by ancient wizards in his hand. During this period, he has been studied very thoroughly. The magic locks obtained from the ruins are defensive, and the floating city as a war fortress needs strategic weapon deterrence.Therefore, the mystery locks of floating city are basically legendary constructs integrating attack and defense."There are many things to do recently!"Alan rubbed his temples and suddenly felt a little busy.In addition to the transformation of the floating city, it is also necessary to complete the establishment of the steel magic image production line as soon as possible. Only by continuously manufacturing steel magic images can we launch a counterattack against the abyss and drive the abyss demons back to their hometown.Compared with the stone magic image production line, the steel magic image production line is much more complex, but the steel magic image production line no longer needs carving technology, but is replaced by casting technology.The steel magic image needs to add a large furnace to melt various metals in a specific proportion, and the molten metal liquid will be poured into a specific mold.There are several ways to produce iron and steel magic image parts. The simplest and most common is the casting method. However, this method needs to make molds every time, and the parts after casting also need to go through a large number of later processes. The casting method is suitable for manufacturing complex parts.In addition to the pouring method, there are plastic forming processes, such as forging, which shape the metal by hammering and extrusion under the conditions of cold processing or high-temperature operation. It is one of the simplest and oldest metal modeling processes, and it is also a very popular way in the world, such as blacksmith.Although this method is common and simple, unexpected results will appear in the hands of some masters. Similarly, this method is the method with the most artifacts.Binding: the high-temperature metal billet passes through several continuous cylindrical rollers, which tie the metal into the mold to obtain the preset shape. Compared with forging, rolling is obviously much more advanced, and mass industrial production starts from here. Including rear extrusion, stamping, etc.Extrusion: a low-cost process for continuous processing, solid or hollow metal molding with the same cross-section shape, which can be used for high-temperature operation and cold processing.Impact extrusion: a process used to process small to medium-sized parts without taper requirements. The production is fast, the parts with various wall thicknesses can be processed, and the processing cost is low.In addition to these, Allen got a lot of more advanced technology from the iron warrior world, powder metallurgy.Powder metallurgy: a process that can process ferrous and nonferrous metal components. It includes two basic processes: mixing alloy powder and pressing the mixture into the mold. Metal particles are formed by high temperature heating and sintering. This process does not need machining, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold.Powder metallurgy also has a larger name 3D printer.The 3D printer can make almost all metal parts. Allen is going to make a 3D printing device, specializing in the complex equipment in the steel magic image."Hot rays can be used to melt metal powder and add frozen rays for cooling.""We also need a computer with strong enough computing power. This is a little troublesome, but we can use taling instead. This time, we got a legendary soul spar from the world of Diablo, which can be used as raw material.""Well, we also need to add anti gravity control device. In other words, this 3D printing device is really complex." looking at the information obtained from the iron blood warrior, Allen chose to use various spells instead.After all, if you copy the original, there will be a lot of materials that can't be processed. After all, some magic materials look unscientific. A 3D printer made of magic technology, hey hey! It's magical to think about it.
