Chapter 807
If audio player doesn't work, press Stop then Play button again
Platinum is the most luxurious material for experiments.
Fortunately, the mining work on Mars has not stopped in recent years. After the platinum was mined, it was all transported back to the earth, and then centralized storage.
After a long time of accumulation, Jiang Cheng has now saved a lot of platinum, enough for him to squander in the experiment.
Soon Jiang Cheng called and asked people to send innumerable materials, all of which are necessary for manufacturing curvature engines.
Of course, a large amount of platinum was sent to Jiang Cheng as consumables for the next experiment.
Jiang Cheng looked at the mountain of platinum keys in the laboratory, and his eyes were a little dazzled.
Next, it's time for Jiangcheng to waste the platinum. Fortunately, Jiangcheng doesn't care about the value of the platinum.
He doesn't know how much platinum he has piled up, and it won't hurt to waste it.
Before starting manufacturing, what Jiang Cheng did first was design.
In this respect, it's not difficult for Jiang Cheng. He has done a lot of curvature engine design in his last life.
The real suffering is the manufacturing work behind. Any mistake will make the whole factory useless.
To develop a curvature engine with high stability, Jiang Cheng may need to make many experimental engines.
These experiments are not only a process of accumulating experience, but also an indispensable failure on the way to success.
In a few days, Jiang Cheng finished the design and drew all the drawings of the curvature engine.
Next, it's time for Jiang Cheng to roll up his sleeves and do a lot of work. It's not easy to make a table.
Fortunately, with Lucy's help, Jiang Cheng can let her control all the equipment.
Jiang Cheng only needs to give guidance on one side, and does not need to work by himself.
Soon Jiang Cheng finished the first curvature engine manufacturing work, but also consumed some materials piled up in the laboratory.
After the completion of the first experimental engine, it does not mean that Jiang Cheng has completed all the work.
The reliability of this kind of experiment is very poor, it will be scrapped after running for a long time, and it can't be installed on the spacecraft at all.
A reliable engine needs countless experimental engines to open up before it can be developed.
In fact, his research and development work has just begun. In the future, it needs Jiang Cheng to sum up his experience among numerous failures, so as to make a real usable curvature guide.
After the manufacture of the first experimental engine, the next step is the testing stage.
After the completion of the test, Jiang Cheng should improve the design of the engine according to the test data, and improve the design of the engine a little bit.
After repeating this work countless times, a perfect curvature engine will be born.
At present, Jiang Cheng is still in the initial stage of work. On the road of curvature engine development, he still has a long way to go.
Ji Su is now standing in front of a curvature engine to prepare for the test.
The volume of this machine is so large that it almost fills every room.
If the whole room were not the largest one in the laboratory, it would not have been able to hold the experimental engine.
Curvature is, after all, a device for spaceships. Of course, it's not much smaller.
This engine is only a primary curvature guide, so its volume is not particularly large.
If it's an advanced curvature engine that can speed up hundreds of times, it's probably the size of a small building.
Jiang Cheng checked the lines connected to the engine, and then started the test.
Lucy, get ready to start the engine test, and pay attention to recording all the data. "
After Jiang Cheng's order, Lucy started the energy transmission line and began to send energy to the engine.
When the energy is transmitted to Yinli, the experimental Yinli in front of Jiang Cheng starts to shine with different colors.
These lights indicate that the folds of space are increasing, and the distance of the whole space is beginning to be shortened.
Among them, Jiang Cheng, who is in Yinfan, doesn't feel much, because what he shortens is the relative distance.
Jiang Cheng, who is under the influence of Yin, will not be affected. He is no different from the normal space.
When the light of different colors on the top of the guide starts to increase, that is when the power of the guide reaches the maximum.
At this time, the space of Zhou state has been reduced by 20 times.
If 573 is on a spaceship, its speed will increase by 20 times.
But now the disadvantages are in a fixed position, so there is no change.
Now only through the test instrument, can we test the change of space.
Master, now the No.1 pilot has reached the maximum power, the space test meets the expectation, and the engine meets the design requirementsLucy is reporting the test data to Jiang Cheng to let him know the specific situation of the experimental engine.
After hearing Lucy's report, Jiang Cheng nodded his head with satisfaction and said: very good, keep the maximum power and see how long this guide can run.
The test data of experiment No.1 meets the design requirements, which does not mean that Jiang Cheng's experiment is successful.
Now it's just a short run, and there's no problem at all.
After running at full power for a long time, all kinds of problems will appear.
These problems are what Jiangcheng needs to solve. The whole R & D process is to find and solve problems.
If a Yinyin can run for a long time, it can meet the requirements of Jiang Cheng.
Master, the engine parameters begin to fluctuate. Several indicators have exceeded the Jing ring line. Do you want to terminate this test.
After running for a few minutes, some problems appeared.
Lucy immediately informed Jiang Cheng of the current situation and asked whether to terminate the experiment.
At this time, the flash of light on the experimental engine began to become unstable, which means that there are some problems.
Just looking at the current situation of the engine, we know that it will stop running soon. It seems that the engine is not stable enough, and it can not run for only a few minutes.
This kind of engine really can't be used. It can only take a few minutes. No one dares to install it on the spaceship.
At least to be able to maintain the dry hours of operation, this kind of engine has practical value, or it is a failed test object.
Judging from the current situation, Jiang Cheng's first experimental engine is a failure
but this is something that has been expected for a long time, so his mood doesn't fluctuate.
He calmly gave the follow-up order to ruoluxi: "stop the energy input, terminate this test.
Please report us if you find any errors so we can fix it asap!
Platinum is the most luxurious material for experiments.
Fortunately, the mining work on Mars has not stopped in recent years. After the platinum was mined, it was all transported back to the earth, and then centralized storage.
After a long time of accumulation, Jiang Cheng has now saved a lot of platinum, enough for him to squander in the experiment.
Soon Jiang Cheng called and asked people to send innumerable materials, all of which are necessary for manufacturing curvature engines.
Of course, a large amount of platinum was sent to Jiang Cheng as consumables for the next experiment.
Jiang Cheng looked at the mountain of platinum keys in the laboratory, and his eyes were a little dazzled.
Next, it's time for Jiangcheng to waste the platinum. Fortunately, Jiangcheng doesn't care about the value of the platinum.
He doesn't know how much platinum he has piled up, and it won't hurt to waste it.
Before starting manufacturing, what Jiang Cheng did first was design.
In this respect, it's not difficult for Jiang Cheng. He has done a lot of curvature engine design in his last life.
The real suffering is the manufacturing work behind. Any mistake will make the whole factory useless.
To develop a curvature engine with high stability, Jiang Cheng may need to make many experimental engines.
These experiments are not only a process of accumulating experience, but also an indispensable failure on the way to success.
In a few days, Jiang Cheng finished the design and drew all the drawings of the curvature engine.
Next, it's time for Jiang Cheng to roll up his sleeves and do a lot of work. It's not easy to make a table.
Fortunately, with Lucy's help, Jiang Cheng can let her control all the equipment.
Jiang Cheng only needs to give guidance on one side, and does not need to work by himself.
Soon Jiang Cheng finished the first curvature engine manufacturing work, but also consumed some materials piled up in the laboratory.
After the completion of the first experimental engine, it does not mean that Jiang Cheng has completed all the work.
The reliability of this kind of experiment is very poor, it will be scrapped after running for a long time, and it can't be installed on the spacecraft at all.
A reliable engine needs countless experimental engines to open up before it can be developed.
In fact, his research and development work has just begun. In the future, it needs Jiang Cheng to sum up his experience among numerous failures, so as to make a real usable curvature guide.
After the manufacture of the first experimental engine, the next step is the testing stage.
After the completion of the test, Jiang Cheng should improve the design of the engine according to the test data, and improve the design of the engine a little bit.
After repeating this work countless times, a perfect curvature engine will be born.
At present, Jiang Cheng is still in the initial stage of work. On the road of curvature engine development, he still has a long way to go.
Ji Su is now standing in front of a curvature engine to prepare for the test.
The volume of this machine is so large that it almost fills every room.
If the whole room were not the largest one in the laboratory, it would not have been able to hold the experimental engine.
Curvature is, after all, a device for spaceships. Of course, it's not much smaller.
This engine is only a primary curvature guide, so its volume is not particularly large.
If it's an advanced curvature engine that can speed up hundreds of times, it's probably the size of a small building.
Jiang Cheng checked the lines connected to the engine, and then started the test.
Lucy, get ready to start the engine test, and pay attention to recording all the data. "
After Jiang Cheng's order, Lucy started the energy transmission line and began to send energy to the engine.
When the energy is transmitted to Yinli, the experimental Yinli in front of Jiang Cheng starts to shine with different colors.
These lights indicate that the folds of space are increasing, and the distance of the whole space is beginning to be shortened.
Among them, Jiang Cheng, who is in Yinfan, doesn't feel much, because what he shortens is the relative distance.
Jiang Cheng, who is under the influence of Yin, will not be affected. He is no different from the normal space.
When the light of different colors on the top of the guide starts to increase, that is when the power of the guide reaches the maximum.
At this time, the space of Zhou state has been reduced by 20 times.
If 573 is on a spaceship, its speed will increase by 20 times.
But now the disadvantages are in a fixed position, so there is no change.
Now only through the test instrument, can we test the change of space.
Master, now the No.1 pilot has reached the maximum power, the space test meets the expectation, and the engine meets the design requirementsLucy is reporting the test data to Jiang Cheng to let him know the specific situation of the experimental engine.
After hearing Lucy's report, Jiang Cheng nodded his head with satisfaction and said: very good, keep the maximum power and see how long this guide can run.
The test data of experiment No.1 meets the design requirements, which does not mean that Jiang Cheng's experiment is successful.
Now it's just a short run, and there's no problem at all.
After running at full power for a long time, all kinds of problems will appear.
These problems are what Jiangcheng needs to solve. The whole R & D process is to find and solve problems.
If a Yinyin can run for a long time, it can meet the requirements of Jiang Cheng.
Master, the engine parameters begin to fluctuate. Several indicators have exceeded the Jing ring line. Do you want to terminate this test.
After running for a few minutes, some problems appeared.
Lucy immediately informed Jiang Cheng of the current situation and asked whether to terminate the experiment.
At this time, the flash of light on the experimental engine began to become unstable, which means that there are some problems.
Just looking at the current situation of the engine, we know that it will stop running soon. It seems that the engine is not stable enough, and it can not run for only a few minutes.
This kind of engine really can't be used. It can only take a few minutes. No one dares to install it on the spaceship.
At least to be able to maintain the dry hours of operation, this kind of engine has practical value, or it is a failed test object.
Judging from the current situation, Jiang Cheng's first experimental engine is a failure
but this is something that has been expected for a long time, so his mood doesn't fluctuate.
He calmly gave the follow-up order to ruoluxi: "stop the energy input, terminate this test.
Platinum is the most luxurious material for experiments. Fortunately, the mining work on Mars has not stopped in recent years. After the platinum was mined, it was all transported back to the earth, and then centralized storage. After a long time of accumulation, Jiang Cheng has now saved a lot of platinum, enough for him to squander in the experiment. Soon Jiang Cheng called and asked people to send innumerable materials, all of which are necessary for manufacturing curvature engines. Of course, a large amount of platinum was sent to Jiang Cheng as consumables for the next experiment. Jiang Cheng looked at the mountain of platinum keys in the laboratory, and his eyes were a little dazzled. Next, it's time for Jiangcheng to waste the platinum. Fortunately, Jiangcheng doesn't care about the value of the platinum. He doesn't know how much platinum he has piled up, and it won't hurt to waste it. Before starting manufacturing, what Jiang Cheng did first was design. In this respect, it's not difficult for Jiang Cheng. He has done a lot of curvature engine design in his last life. The real suffering is the manufacturing work behind. Any mistake will make the whole factory useless. To develop a curvature engine with high stability, Jiang Cheng may need to make many experimental engines. These experiments are not only a process of accumulating experience, but also an indispensable failure on the way to success. In a few days, Jiang Cheng finished the design and drew all the drawings of the curvature engine. Next, it's time for Jiang Cheng to roll up his sleeves and do a lot of work. It's not easy to make a table. Fortunately, with Lucy's help, Jiang Cheng can let her control all the equipment. Jiang Cheng only needs to give guidance on one side, and does not need to work by himself. Soon Jiang Cheng finished the first curvature engine manufacturing work, but also consumed some materials piled up in the laboratory. After the completion of the first experimental engine, it does not mean that Jiang Cheng has completed all the work. The reliability of this kind of experiment is very poor, it will be scrapped after running for a long time, and it can't be installed on the spacecraft at all. A reliable engine needs countless experimental engines to open up before it can be developed. In fact, his research and development work has just begun. In the future, it needs Jiang Cheng to sum up his experience among numerous failures, so as to make a real usable curvature guide. After the manufacture of the first experimental engine, the next step is the testing stage. After the completion of the test, Jiang Cheng should improve the design of the engine according to the test data, and improve the design of the engine a little bit. After repeating this work countless times, a perfect curvature engine will be born. At present, Jiang Cheng is still in the initial stage of work. On the road of curvature engine development, he still has a long way to go. Ji Su is now standing in front of a curvature engine to prepare for the test. The volume of this machine is so large that it almost fills every room. If the whole room were not the largest one in the laboratory, it would not have been able to hold the experimental engine. Curvature is, after all, a device for spaceships. Of course, it's not much smaller. This engine is only a primary curvature guide, so its volume is not particularly large. If it's an advanced curvature engine that can speed up hundreds of times, it's probably the size of a small building. Jiang Cheng checked the lines connected to the engine, and then started the test. Lucy, get ready to start the engine test, and pay attention to recording all the data. " After Jiang Cheng's order, Lucy started the energy transmission line and began to send energy to the engine. When the energy is transmitted to Yinli, the experimental Yinli in front of Jiang Cheng starts to shine with different colors. These lights indicate that the folds of space are increasing, and the distance of the whole space is beginning to be shortened. Among them, Jiang Cheng, who is in Yinfan, doesn't feel much, because what he shortens is the relative distance. Jiang Cheng, who is under the influence of Yin, will not be affected. He is no different from the normal space. When the light of different colors on the top of the guide starts to increase, that is when the power of the guide reaches the maximum. At this time, the space of Zhou state has been reduced by 20 times. If 573 is on a spaceship, its speed will increase by 20 times. But now the disadvantages are in a fixed position, so there is no change. Now only through the test instrument, can we test the change of space. Master, now the No.1 pilot has reached the maximum power, the space test meets the expectation, and the engine meets the design requirementsLucy is reporting the test data to Jiang Cheng to let him know the specific situation of the experimental engine. After hearing Lucy's report, Jiang Cheng nodded his head with satisfaction and said: very good, keep the maximum power and see how long this guide can run. The test data of experiment No.1 meets the design requirements, which does not mean that Jiang Cheng's experiment is successful. Now it's just a short run, and there's no problem at all. After running at full power for a long time, all kinds of problems will appear. These problems are what Jiangcheng needs to solve. The whole R & D process is to find and solve problems. If a Yinyin can run for a long time, it can meet the requirements of Jiang Cheng. Master, the engine parameters begin to fluctuate. Several indicators have exceeded the Jing ring line. Do you want to terminate this test. After running for a few minutes, some problems appeared. Lucy immediately informed Jiang Cheng of the current situation and asked whether to terminate the experiment. At this time, the flash of light on the experimental engine began to become unstable, which means that there are some problems. Just looking at the current situation of the engine, we know that it will stop running soon. It seems that the engine is not stable enough, and it can not run for only a few minutes. This kind of engine really can't be used. It can only take a few minutes. No one dares to install it on the spaceship. At least to be able to maintain the dry hours of operation, this kind of engine has practical value, or it is a failed test object. Judging from the current situation, Jiang Cheng's first experimental engine is a failure but this is something that has been expected for a long time, so his mood doesn't fluctuate. He calmly gave the follow-up order to ruoluxi: "stop the energy input, terminate this test.
